SPORTident Kontrollstation BSF 9

Beschreibung derzeit nur in Englisch verfügbar!

Description

• The SPORTident-Station BSF9 is based on an advanced hardware core. The completely new design offers a number of significant improvements and new features compared with the older series of SPORTident-Stations. The BSF9 station is compatible with the existing SPORTident-System parts and can be used mixed with older equipment.

• The BSF9 station is designed as a smooth and compact device. It is about the size of a keypad based phone but still large enough to incorporate a number of future enhancements. Different mounting options allow the station to be used for a variety of applications in different environments. A special semi-transparent plastic is used to show off the insides.

• The BSF9 station is “always on” and works in a low power Stand-by Mode. There is no need to switch on the station or to make any special preparations before the unit can be used. Also in Stand-by Mode the station is ready to process SPORTident-Cards. The maximal wake up time is 1 second but can be adjusted by the user. A faster wake up will increase station’s power consumption. The station is switched from Stand-by Mode to Active Mode when the first SPORTident-Card is inserted.

• Once the station is in Active Mode the reaction time to the insertion of subsequent SI-Cards is very quick. After an adjustable period without a SI-Card being inserted, the station drops back to Stand-by Mode.

• The BSF9 station features with an on-board service display visible from the top side only. The display shows quickly main stations' settings like real time and code number. After a card has punched the card number is displayed for 3 seconds.

• From Stand-by Mode the station can also be switched to Service Mode. This is done by switching on the station with the Instruction card "Service/OFF". In Service Mode the station’s LCD display offers additional information like the serial number, battery consumption and firmware version. Information about station’s battery is given both by measuring the battery voltage and by computing the station’s battery consumption in relation to the battery performance. Service Mode is automatically terminated after 10 minutes or earlier if the Instruction card "Service/OFF" is used.

• The SPORTident station BSF9 features with a very low power consumption. In typical application cycles a battery will serve for several years. This battery type does neither contain Cadmium nor Mercury. Other points of importance are improved environmental properties because there is no need to glue together.

• The station’s real time clock system is calibrated and temperature compensated. This offers higher accuracy also at very high and very low temperatures. The internal time resolution is 1/256 s, approximately 4 ms.

• The station’s backup memory is increased and stored more than 20.000 punching records.

• The BSF9 station supports contactless punching according to the latest IOF specification for foot-o. No hardware investments are required. In addition to the direct punching functionality beacon records are sent out by the station one a time slot base. A “mixed” usage of the station direct/contactless punching within one event is possible. To enable mixed working mode the station has to be programmed in a working mode with a prefix “BC_…​”. The default working time for beacon mode should be set to 12 hours. The station explicitly must be switched into active mode by a direct punch. Stations backup memory does not record contactless punching records by default for power consumption reasons. Instead SIAC’s backup radio channel can be used together with a radio dongle or the SI-GSM.

Key features:

• control station for universal use
• direct punching modes only or combined direct/contactless punching modes fully in accordiance to IOF standards
• Extremely low power consuming working scheme for typically five years of operating time before battery exchange
• Easiest user handling based on “always on” feature, no need to switch on or turn off the station
• High robustness for distributed setup caused by real time clock concept and highly accurate internal clock system
• Non-volatile configuration memory and data backup memory for more than 20.000 punching records
• Extremely stable and robust housing that fits into the mounting plate for the BSx8.
• Warranty 2 years

 Improvements compared to station BSF8

• The BSF9 has a new housing with a closed recess for punching. Two gutters ensure that rainwater can run off. Compared to the BSF8 with its continuous hole, the housing of the BSF9 does not have a sealing ring and is therefore even more resistant to penetrating moisture.

• The two halves of the BSF9 housing are held together with 4 screws. This makes the station easier to maintain compared to the BSF8.

• The production and disposal of the station is more environmentally friendly, as the adhesive between the housing halves like the BSF8 can be dispensed with.

• The housing of the BSF9 is compatible with the Mounting Holder and O-Stand for the BSF8.

Description please look at the data sheet. Delivery time subject to availability by the manufacturer!

Beschreibung und Funktion entnehmen Sie bitte aus dem Datenblatt. Lieferzeit je nach Verfügbarkeit beim Hersteller!